|
|
 |
 |
Specification
General
Component list, working drawings and erection instructions supplied on delivery.
Structural
NB All structural timbers are stress graded whitewood and pressure treated with preservative to protect against rot and fungal attack.
38 x 100 mm Wall plates and M8 x 100 mm anchor fixings.
45 x 145 mm Floor joists and perimeter beams, cut to length.
22 x 145 mm Perimeter plates.
Prefabricated external wall panels comprising 45 x 145 mm framing at 600 mm centres, clad externally with 9 mm sheathing boards and breather membrane.
Prefabricated gable wall panels comprising 45 x 95 mm framing at 600 mm centres, clad externally with 9 mm sheathing boards and breather membrane.
38 x 50 mm Fire stops.
Heavy duty galvanised steel holding down straps and stainless steel wall ties.
45 x 145 mm Head binders.
Prefabricated, 40 degree pitch, fink type roof trusses, fixing clips and hangers.
25 x 100 mm Longitudinal and diagonal wind bracing.
20 x 145 mm White PVC fascia board to eaves.
10mm White PVC soffit board to eaves.
PVC continuous over fascia and cross-flow roof ventilation units
9 mm Roof sarking boards and 22kg reinforced roofing felt.
12 x 38 mm Roof tile counter battens.
25 x 50 mm Roof tile fixing battens.
38 x 50 mm Floor, wall and ceiling dwangs.
White PVCu high performance double glazed windows with locking handles and trickle ventilators.
White PVCu entrance door set(s) comprising a 'Cottage' style double glazed (toughened) door hung in a fully weather-stripped frame with multi-point locking system. Front door fitted with letter box in addition.
White PVCu tilt and slide double glazed (toughened) patio door set (where applicable).
Finishings
150 mm Underfloor insulation quilt and support membrane.
22 mm C4(M) Moisture resistant tongued and grooved chipboard flooring.
Prefabricated partition panels comprising 45 x 70 mm framing at 600 mm centres.
150 mm Insulation quilt for external walls.
250 mm Insulation quilt for roof space.
60 mm Insulation quilt for bathroom partitions.
12.7 mm Plain plasterboard for ceilings and partitions (two layers for Garage ceilings).
12.7mm Vapour check plasterboard for external walls.
12.7mm Moisture resistant plasterboard for showers.
12.5 mm Fire / moisture resistant gypsum-fibreboard for Garage walls.
Pre-assembled roof space ceiling hatch and telescopic aluminium ladder.
Internal door sets comprising a pine veneered flush door hung in a redwood frame with latch / lock fitted; brass coloured 'Victorian' lever handles (supplied loose), generally.
Internal door set comprising a pine 15 pane, single glazed (clear bevelled toughened) door hung in a redwood frame with latch fitted; brass coloured 'Victorian' lever handles (supplied loose), to Lobby.
Sliding safety backed, mirrored doors in redwood sub-frame, together with full width shelf and hanging rail for wardrobes.
Redwood ingoe plates, bull-nosed projecting cill board and moulded apron for windows.
Redwood moulded skirtings, facings and sundry fillets.
Cold water storage tank and hot water cylinder stands.
9/18 mm WBP plywood pipe box.
Slatted shelving, bearers and supports for linen cupboard.
Nails, screws and sundry fixings.
Copyright
The house kit designs on this website and all variations of them are copyright of Norscot Joinery Limited. They may not be used or reproduced, in any form, for the benefit of any person without written consent of Norscot Joinery Limited. Any person, firm or company in breach of this copyright will be liable to a claim for damages.
Disclaimer
This website section is for illustrative purposes only. Artist's impressions may show features which are not part of our standard kit package but should be available, as an optional extra, from either us or your builder. Floor areas and all other sizes are stated in metres (1m2 = 10.75ft2 & 1m = 3.25ft); they are approximate and for guidance only. Room sizes exclude wardrobes.
Whilst every care has been taken during the compilation of this website, variations may occur. It neither constitutes nor forms any part of a contract. All contracts are subject to individual quotations, drawings and specifications.
We reserve the right to modify the design and/or specification of any house kit, without prior notice, in conformity with our policy of continuous updating and improvement.
|
|
